- 104 -
Printing from a Computer
5
Printing
2 Hold down the power switch for
approximately one second to turn off the
power. And turn off a computer.
3 Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4 Plug the other end of the Ethernet cable
into the hub.
5 Hold down the power switch for
approximately one second to turn on the
power.
6 Press the <SETTING> key on the
operator panel.
7 Press the to select [Easy Setup], and
press
OK
.
8 Enter the administrator password.
The factory default password is “aaaaaa”.
To Next Page
Loading...
Need help?
General
