3-42
Memory switch 07x : Operation
Memory switch 070 :
bit
Initial
Setting
Adjust Usage / Comments
7 0 Display error line
0 : No
1 : Yes
The number of error lines contained in the received data will
be shown in the LCD.
6 0 Tonal line monitor
Allows fax communication to be heard through the monitor
speaker.
bit 6 5
1 0 ON
0 1 Monitor until DIS outputs
0 0 OFF
5
4 0
Factory use only —
3 1 Print check message if
power is lost
0 : No
1 : Yes
If the machine could not hold the memory in an event of power
losses, documents will be lost. When power is restored, a
check message will print.
2 1 Print page if error occurs
during memory transmis-
sion
0 : No
1 : Yes
For easy identification, the first page of a document stored for
memory transmission will print along a check message if an
error occurs during memory transmission.
1 1 Print check message
0 : No
1 : Yes
To notify the user of an error, a check message can be printed
if a communication error occurs.
0 0
Factory use only —
To Next Page
