Need help?Do you have a question about the Murr Elektronik MASI65-M12 Series and is the answer not in the manual?
General| Operating Voltage | 24 VDC |
|---|---|
| Protection Class | IP67 |
| Housing Material | Plastic |
| Output Voltage | 24 VDC |
| Input Voltage Range | 18 - 30 V DC |
| Operating Temperature | -25 °C to +60 °C |
| Connection | M12 |
| Protection | Overload, short-circuit |
Defines the intended application and purpose of the MASI65-M12 series modules.
Identifies the intended audience and their required qualifications for handling the equipment.
Outlines the applicable regulations and directives that must be adhered to during use.
Lists relevant equipment, EMC, and safety standards applicable to the product.
Explains the meaning and usage of various symbols and signs used in the manual.
Details the proper use and interpretation of caution and danger signs for safety.
Provides an overview of the AS-Interface system, its architecture, and basic principles.
Details key system parameters such as topology, cable length, number of slaves, and bit rate.
Offers essential guidance and a checklist for users new to AS-Interface systems.
Covers electrical aspects including system cables, power supply, voltage drop, and cable cross-sections.
Describes the types of cables used in AS-Interface systems and their specifications.
Details the AS-Interface system power supply requirements and characteristics.
Explains voltage drop considerations and the minimum acceptable voltage levels.
Presents data on the influence of various cable cross-sections on voltage drop.
Explains the slave profile, its importance for identification, and its programming.
Details the process of addressing AS-Interface slaves, methods, and requirements.
Describes the overall system configuration process and methods.
Provides step-by-step instructions for configuring the system using an addressing device.
Outlines the procedure for configuring the system directly through the AS-Interface master.
Explains the conditions and process for automatic slave configuration and replacement.
Describes the concept of cascading slaves and addressing limitations.
Covers addressing for AB slaves and extended specifications.
Details the procedures for physically mounting the MASI65-M12 modules.
Explains the method of attaching modules using screws to a panel or machine.
Provides specific instructions for screwing an 8-way module into place.
Provides specific instructions for screwing a 4-way module into place.
Describes how to mount the modules onto a DIN rail using an adapter.
Covers the wiring procedures for the AS-Interface system components.
Details the wiring for the AS-Interface field bus using flat or round cables.
Explains how to connect the power supply to the modules and peripherals.
Describes the proper connection of the module to functional earth for safety.
Explains how to connect modules to the AS-Interface field bus.
Shows the layout and color coding of the AS-I flat cable.
Details the process of connecting the AS-I bus cable using vampire contact and cable guides.
Describes the support and usage of the bus branching function for MASI65-M12 modules.
Covers connecting the system and auxiliary power supplies to the modules.
Illustrates the cable layout for power supply connections.
Explains how to connect auxiliary power supplies for actuators.
Details how to connect sensors and transmitters to the modules.
Shows the pinout for M12 connectors with single signal assignment for sensors.
Shows the pinout for M12 connectors with double signal assignment (Y wiring).
Explains how to connect actuators (loads) to the modules.
Shows the pinout for M12 connectors with single signal assignment for actuators.
Shows the pinout for M12 connectors with double signal assignment for actuators.
Details the connection of addressing devices for module configuration.
Explains the specific interface plug for connecting addressing devices to MASI65-M12 modules.
Explains the LED indicators for bus and device status on the module.
Describes the LED indicators for individual input and output status.
Mentions the auxiliary supply status indicator and its properties.
Lists the interference immunity specifications for the MASI65-M12 series according to EMC standards.
Provides detailed technical specifications for standard MASI65-M12 slaves.
Detailed technical data for the MASI65 DI8/0,4A Y 8xM12 module.
Detailed technical data for the MASI65 DI4/0,2A DO4/2A Y 8xM12 module.
Detailed technical data for the MASI65 DI8/0,4A BV Y 8xM12 module.
Detailed technical data for the MASI65 DI4/0,2A BV Y 4xM12 module.
Detailed technical data for the MASI65 DI4/0,2A 4xM12 module.
Detailed technical data for the MASI65 DI8/0,4A 8xM12 module.
Detailed technical data for the MASI65 DO4/0,5A 4xM12 module.
Detailed technical data for the MASI65 DO4/2A 4xM12 module.
Detailed technical data for the MASI65 DO8/0,5A 8xM12 module.
Detailed technical data for the MASI65 DI4/0,2A DO4/0,5A 8xM12 module.
Detailed technical data for the MASI65 DI4/1,6A DO4/2A 8xM12 module.
Detailed technical data for the MASI65 DI4/0,2A BV 4xM12 module.
Detailed technical data for the MASI65 DI8/0,4A 8xM12 module.
Detailed technical data for the MASI65 DI4/0,2A DO4/2A 8xM12 module.
Detailed technical data for the MASI65 DI2/0,2A DO2/2A 4xM12 module.
Detailed technical data for the MASI65 DI4/0,2A DO4/0,5A Y 8xM12 module.
Detailed technical data for the MASI65 DI4/0,2A Y 4xM12 module.
Provides detailed technical specifications for AB slave variants of MVK12 modules.
Detailed technical data for the MASI65 DI4/0,2A DO3/2A AB Y 8xM12 module.
Detailed technical data for the MASI65 DI8/0,2A AB Y 8xM12 module.
Detailed technical data for the MASI65 DI4/1,6A DO3/2A AB Y 8xM12 module.
Describes the features and layout of the MASI65-M12 8-way module.
Describes the features and layout of the MASI65-M12 4-way module.
To Next Page
