MASI65-M12 User's Manual
V 1.1 31
The module is snapped-in from the top side and attached by using a screw on the installation panel (Fig.
4-2.). The tightening torque is 1 +/- 0,1Nm.
Fig. 4-2 : MASI65-M12 module mounting
When the end of the profiled cable is in the module, it is necessary to install a termination cap (Art. No
55746) (Fig. 4-3.), to avoid dust and humidity inside de module.
ΠTermination element
• Cable
Ž Termination cap
Fig. 4-3 : MASI65-M12 bus connection
To Next Page
Loading...