MUTOH Ultima 850 - Page 26

Mutoh Ultima Multi-Purpose Cutting Plotter - Operation Instructions
26
AP-75125, Rev 1.3 ; 20/10/04
Origin-LED
Lights when alternative origin is selected.
Blinks when changing origin.
Contour Cutting LED
Blinks when executing alignment procedure.
Take-up System LED
This LED will light up if you selected the Take-Up System.
Sheet Media LED
This LED will light up if you selected Sheet Media.
Roll Media LED
This LED will light up if you selected the Roll Media.
Display
4 lines / 16 characters
Displays the LCD-display messages, shows settings/values and allows menu-wise
control.