Mutoh Ultima Multi-Purpose Cutting Plotter - Operation Instructions
40
AP-75125, Rev 1.3 ; 20/10/04
4.3. LANGUAGE SELECTION
It is possible to change the user language of your cutter.
Please follow the instructions below :
Step 1 : In the general setting select [LANGUAGE] with the UP or DOWN key
Step 2 : Press the [ENTER] key to confirm your selection. The actual LANGUAGE-setting will now be
shown on the display
Language
Actual : ENGLISH
New : ENGLISH
Language
Step 3 : By pressing the [UP] or [DOWN] key select the appropriate language. Five language settings are
available (English, German, French and Dutch).
Notes :
To cancel the changes of the Language parameter, press the [CANCEL] or [EXIT] key.
The display will show the previous value for the Language parameter.
Step 4 : Press the [ENTER] key to confirm the changes and go back to the previous menu.
To Next Page
Loading...
