Mutoh Ultima Multi-Purpose Cutting Plotter - Operation Instructions
33
AP-75125, Rev 1.3 ; 20/10/04
Step 3 : Following display will appear.
→ User 1
Enter = select
↑ = Up
↓ = Down
Step 4 : Use the [UP] or [DOWN] key to select the user setting you want to delete.
Step 5 : Press the [ENTER] key to confirm. The Ultima cutting plotter will delete the selected user setting.
Notes :
To cancel the changes of the parameter, press the [CANCEL] key. The display will
show the previous value for the parameter.
When you press the [EXIT] key the changed value will be ignored and you go back to
the previous menu.
To Next Page
Loading...
