VJ-1638/1638W OPERATION MANUAL ERRATA
October 2012
VJ1638xE-A-01c 23 MUTOH INDUSTRIES LTD.
5.1.26 Header Dump menu
This function is to specify whether to print the following information (dump data) of print data.
・Data Header
・Number of Dot in Data (Printed only when the header dump setting is “On”.)
・Printer Serial Number
・Firmware Version
The dump data will be used as a reference material to receive technical supports.
NOTE
When a print is executed in connection with computer, the setting of RIP software will be printed in the
“Data Header”.
Setup Item Set Value Description
<Off> ・ Only a print data will be printed.
・ Damp data will not be printed.
On After printing of print data, the dump
data will be printed.
Dump ・ Only a dump data will be printed,
but the “Number of Dot in Data”
will not be printed.
・ Print data will not be printed.
Header Dump
− [Cancel] Key: Save the set value, and
return to the previous menu.
5.1 Setup menu
To Next Page
Loading...
