VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL Before using
3.5 Test print 125
3.5.6.1 Standard head alignment
Adjustment is performed only for the print mode set by the current User Type.
1. Turn ON the printer and load the roll media.
3.4.2 Setting Roll Media
2. Display the Micro adjustment menu on Operation panel.
a. Press the [Menu] key on Operation panel.
• “Menu 1: Setup>” is displayed on the operation panel.
b. Press the [+] key or [-] key on Operation panel to select "Menu2: Test Print>".
To Next Page
Loading...
Need help?
General