Panel setup menu VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
276 5.1 Setup menu
5.1.29 Start Feed Menu
In the Start Feed menu, you can change the margin setting between images.
• With take-up system: if you want to set "Start Feed" to below 0, set "Page Gap" to "Narrow".
If not, the Start Feed setting is not reflected properly.
5.1.6.2 Page Gap menu
Setup Item Description Setup Item
Start Feed -10 mm to <0 mm> to
500 mm
• Value over 0: The margin setting between images will be
wider than when setting "0".
• Value equal to 0: The default margin setting between
images will be applied.
• Value below 0: The margin setting between images will be
smaller than when setting "0".
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General