MW TOOLS HB240 - Page 38

38
M1.2.HB240-HB240M.NLFREN 21112017
EN
9� Connect wires (g. 10).
1. Mount the control box on to the power side post.
2. Fix the limit switch into the power side post (g. 11)
3. Connect the solenoid valve and motor wire (g. 12).
USER’S GUIDE V1.0 201511
- 10 -
Step9: Connect wires.
1. Mount the control box on to the power side post.
2. Fix the limit switch into the power side post.
3. Connect the wire of solenoid valve and motor wire
USER’S GUIDE V1.0 201511
- 10 -
Step9: Connect wires.
1. Mount the control box on to the power side post.
2. Fix the limit switch into the power side post.
3. Connect the wire of solenoid valve and motor wire
Fig� 10
USER’S GUIDE V1.0 201511
- 10 -
Step9: Connect wires.
1. Mount the control box on to the power side post.
2. Fix the limit switch into the power side post.
3. Connect the wire of solenoid valve and motor wire
Fig� 11
Fig� 12
copyrighted document - all rights reserved by FBC