myPOS Mini - How to Connect Your Mypos Mini with Bluetooth

myPOS Smart Technical Specicaon & Warranty (Updated March 2018) | page 4
myPOS Mini - User Manual | page 4
How to connect your myPOS Mini
with Bluetooth
Make sure the Bluetooth on your mobile phone is ON (acvated). Switch ON your
myPOS Mini and wait for a few seconds unl it completes the inializaon.
Step1: Select “Bluetooth” from the CONNECTION TYPE menu by pressing (3) on
the keyboard. It will warn you to install and open the myPOS BT App on the mobile
phone in order to proceed, conrm by pressing “O”. The myPOS Mini will scan for all
available (discoverable) Bluetooth devices in its range and will display a list of their
names on the screen.
Step 2: Choose your mobile phone’s name from the list and select it by pressing its
respecve number (from 1 to 6) on the keyboard. If there are more than 6 available
devices on the list, you can switch to the next page of the list by pressing (F2). If
you cannot nd your mobile phone on the list, press (X) and myPOS Mini will rescan
(search again) for all available discovered devices. Make sure your mobile phone is in
a discovered mode.
Depending on the device, you might have to tap “Pair device” to accept the
password. The password is shown on the myPOS device screen.
Step3: Pair the myPOS Mini with your mobile phone. Once it has been paired,
myPOS Mini will perform a test of the connecon to myPOS system. If the test is
successful, the following myPOS Mini screen will appear:
If the connecon test is unsuccessful, the myPOS Mini screen will display an error
message. Please, check and make sure your mobile phone is connected to the
Internet.
When you pair myPOS Mini with a Bluetooth device, the informaon is saved so that
the next me you are within the range of the same Bluetooth device, the terminal
will connect to it automacally.