myPOS Mini - How to Connect Mypos Mini Using SIM Card

myPOS Smart Technical Specicaon & Warranty (Updated March 2018) | page 6
myPOS Mini - User Manual | page 6
Useful ps
• When myPOS Mini connects to a Wi-Fi network, the informaon is saved so
that the next me you are within the range of the same network, the terminal
will connect to it automacally.
• If the password of your Wi-Fi network has been changed, the Wi-Fi signal icon
( ) on the screen will become grey.
• If you try to make a payment transacon, the terminal will display an error
message – “You are not connected to any network” - and will search for
available networks.
• If a previously used network is found, the myPOS Mini device will connect to it
automacally and will process the transacon.
• In order to change the saved password, choose the “Change connecon
type” opon from the SETTINGS MENU 1 and enter the new password when
prompted.
• If you are within a previously used network range and do not want your
myPOS Mini device to connect to it automacally, you can delete the saved
data by choosing opon 3: “Forget this network”.
How to connect myPOS Mini
using SIM card
Step 1: Remove the back cover of the device by pressing down the buon on top of
the panel and remove the baery. You will see the SIM and SAM compartments.
Step 2: Insert your SIM card in the SIM card slot 1 (the front one) with the gold
coloured contact surface facing down.
• Make sure that the SIM card is inserted in the SIM slot 1 (the front one).
• Your myPOS Mini device is working with standard SIM card size. If you have
micro or nano SIM card, please use a SIM adapter.
Put the baery back into the myPOS Mini device, close the cover and switch ON the
device.
Step 3: Enter your SIM PIN.
Your device supports more than one connecon type, so please choose SIM card on
the Connecon type screen.
If the mobile network was not recognized, the myPOS Mini device will display
an error message and two opons: to try again (X) or to manually enter the APN
sengs (O) of your mobile network.
Once it has connected to your mobile network, the myPOS Mini will perform a test
of the connecon to the myPOS system.
If the test is successful, the following myPOS Mini screen will appear:
If the connecon test is unsuccessful, the myPOS Mini screen will display an error
message.