N-Com Bluetooth Kit3 PLUS User Manual

15
6. MOBILE PHONE FUNCTIONS
Answering a phone
call
Briefly press any key when you hear the incoming call signal
Hanging
up/rejecting a
phone call
Press “on” and keep it pressed for about 2 seconds (until you
hear the acoustic signal)
Voice call (if
equipped)
Press “on” and keep it pressed for about 4 seconds (until you
hear the acoustic signal)
Redial last number Briefly press “” and “” at the same time
Transferring a call
from helmet to
mobile phone
To transfer an ongoing call from the helmet to the mobile
phone, press both “” and “” at the same time and keep
them pressed for 4 seconds
Conference call function
Bluetooth Kit3 PLUS allows a conference call with Rider and Pillion Passenger.
When a call comes in on a mobile phone connected via Bluetooth to Bluetooth Kit3
PLUS, the Rider-Pillion Passenger intercom is temporarily turned off. However, if you
wish to share the phone call with the other helmet, simply turn on the intercom
manually during the phone call (by briefly pressing “on”).
Caution: this function is available only if the Pillion Passenger helmet is also equipped
with a N-Com system provided with the same function.
If you are using the “Universal Intercom”, you need to check whether the other
intercom supports the Conference feature.

N-Com Bluetooth Kit3 PLUS Specifications

General

Brand	N-Com
Model	Bluetooth Kit3 PLUS
Category	Automobile Accessories
Language	English