16
7. GPS SATELLITE NAVIGATOR FUNCTIONS
Bluetooth Kit3 PLUS is compatible with the most common satellite navigators for
motorcycles. By connecting the N-Com system to the GPS, all instructions will be
transferred to the helmet.
Every time the navigator communicates instructions, the intercom via Bluetooth with
the Pillion Passenger is cut off and automatically restored at the end of the
communication.
Note: If the navigator is pre-set for connection to a Bluetooth mobile phone, you will
be able to receive the phone call audio directly in the helmet through the GPS. In
this case, you can answer the call directly from the navigator.
GPS Conference Call Function
The Conference function allows you to keep the “Rider-Pillion Passenger” intercom
open even while the satellite navigator is giving instructions, thus preventing the
intercom mode to be turned off every time the navigator gives instructions. However,
if you wish to activate the Conference GPS function, simply turn on the intercom
manually during the GPS directions (by briefly pressing “on”).
Caution: this function is available only if the Pillion Passenger helmet is also equipped
with a N-Com system provided with the same function.
If you are using the “Universal Intercom”, you need to check whether the other
intercom supports the Conference feature.
At the end of the GPS communication, the intercom with the second helmet stays
open and the "Conference" setting is stored for future GPS communications.
In case of “Bike-to-Bike” intercom, GPS instructions are only forwarded to the helmet
connected to the navigator, and the intercom communication stays open.
To Next Page
Loading...
Need help?
General
