N-Com Bluetooth Kit3 PLUS User Manual

21
12. N-COM INTERCOM VIA CABLE
In order to use N-Com Bluetooth Kit3 PLUS as intercom via cable, you need to use an
Intercom Wire (sold separately) to connect the two helmets.
 Install the Basic Kit2 + Bluetooth Kit3 PLUS in the Rider's helmet.
 Fit the Pillion Passenger’s helmet with Basic Kit2 (positioning the basic electronic
card in its housing).
 Connect the Rider’s helmet to the Pillion Passenger’s helmet using the Intercom
Wire (sold separately) in the following manner:
- connector A (smaller, L-shaped) in the Rider’s helmet (equipped with Bluetooth
Kit3 PLUS);
- connector B (larger one) in the Pillion Passenger's helmet.

N-Com Bluetooth Kit3 PLUS Specifications

General

Brand	N-Com
Model	Bluetooth Kit3 PLUS
Category	Automobile Accessories
Language	English