NAD C 446 - USB and iPod Media Playback

USB
The C 446 can play back AAC, MP3, WMA, WAV or FLAC les stored on a USB
(Universal Serial Bus) memory stick. Connect the USB memory stick into the
front panel USB port.
When connected, the following keys on the TNR 2 remote control are
active:
[4], [j], [g], [7/8], [9/0], [MENU], [SHUF], [RPT]
Playback the les in your USB memory stick as prompted in the VFD or as
you would in normal USB playback.
The following are the C 446’s capabilities with respect to USB device
playability.
USB SUPPLEMENTARY INFORMATION
Maximum number of folders supported 128
Maximum le in one folder 511
Maximum le in device 65408
Maximum number of sub-directory 8
Maximum number of bytes supported for Folder/File name 64
Maximum number of bytes supported for ID3 Title/Artist/
Album
60
Maximum bit rate supported VBR, 320K
HDD handling capacity (additional power adapter maybe
required for some HDD models)
FAT 16/32
USB version supported 1.1
iPod
The C 446 has a MP DOCK DATA PORT where a corresponding DATA PORT
from a NAD IPD Dock for iPod (NAD IPD) can be connected and interfaced.
This allows control of the NAD IPD via C 446.
Playback the les from your docked iPod as prompted in the VFD or as you
would when operating your iPod player independently.
When connected, the following keys on the TNR 2 remote control are
active:
[4], [j], [g], [7/8], [9/0], [MENU], [SHUF], [RPT]
These TNR 2 keys operate like their corresponding iPod player buttons or
function.
NOTES
• NADIPDandiPodplayerarenotsuppliedwithyourC446.
• iPodplayerfunctions,featuresandplaybackcapabilitiesaccessible
throughC446mayvarydependingonyouriPodplayermodel.
USB
Attached
iPod Display
iPod Connected
OPERATION
USING THE C 446  OTHER SOURCES
14
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ