EasyManuals Logo

NAD C 446 User Manual

NAD C 446
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
MANUAL SCAN
This option allows you to manually tune to a desired DAB broadcast and
include it in the service list (if not yet available at the time). You can also
use MANUAL SCAN to assist you in positioning the DAB antenna for best
reception of the desired DAB broadcast.
1 While listening to a DAB broadcast, select “Manual Scan” from “DAB
Setup” menu.
2 To select other channels, toggle [A/S] to step through the channel list.
Release [A/S] when you have arrived at your desired channel.
NOTE
Thenumberofensemblesandstationsthatcouldbescannedwillvary
dependinguponyourlocation.
PRUNE LIST
There maybe situations wherein certain stations become inactive. The
“Prune list” option enables the deletion of these inactive stations in the
service list.
1 While listening to a DAB broadcast, select “Prune List” from “DAB Setup”
menu.
2 At “Prune List” menu, use [D/F] to select between “Cancel” and
“Conrm Prune. Any inactive stations (normally preceded by a “?” mark)
are automatically deleted when “Conrm Prune” is selected. Otherwise,
select “Cancel”.
RESET SETTINGS
The “Reset Settings” allows the DAB section of the C 446 to be reset to its
factory default settings.
1 While listening to a DAB broadcast, select “Reset Settings” from “DAB
Setup” menu.
2 At “DAB Factory Reset” menu, use [D/F] to select between “Cancel”
and “Conrm Reset. Selecting “Conrm Reset” will cause the DAB
section to be reset to its factory default settings. Otherwise, select
“Cancel”.
INFORMATION SETTINGS
While listening to a DAB broadcast, the type of information displayed in the
second line of the VFD can be varied. Toggle TNR 2’s [INFO] button to step
through the following display options
station name
program type
ensemble name
time and date
audio signal information
others
Above information may not always be available and are dependent upon
the DAB stations supplied information.
The scrolling text (if available) at the bottom line of the VFD is the Dynamic
Label Segment (DLS). It may contain information on music titles or details
regarding the program or station.
Manual Scan
6A 181.936M
Status: Tuning
Signal Strength 10%
Prune List
Cancel
}Confirm Prune
DAB Factory Reset
Cancel
}Confirm Reset
OPERATION
LISTENING TO DAB RADIO
18
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Other manuals for NAD C 446

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NAD C 446 and is the answer not in the manual?

NAD C 446 Specifications

General IconGeneral
BrandNAD
ModelC 446
CategoryTuner
LanguageEnglish

Related product manuals