EasyManuals Logo

NAD C 446 User Manual

NAD C 446
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
INTRODUCTION
GETTING STARTED
WHAT’S IN THE BOX
Packed with your C 446 you will nd
AM loop antenna
FM ribbon-wire antenna with balun
Wireless antenna
DAB antenna (230V version model only)
Detachable mains power cord
TNR 2 remote control with 2 AA batteries
Quick Start guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 446 arrived.
Should you move or otherwise need to transport your C 446, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 25 feet/8
meters, between the C 446’s front panel and your primary listening/viewing
position - this will ensure reliable infrared remote control communications.
The C 446 generates a modest amount of heat, but nothing that should
trouble adjacent components. It is especially important that sucient
ventilation be provided.
RESTORING C 446 TO ITS FACTORY DEFAULT SETTINGS
Sometimes power spikes and drop-outs may from time to time cause some
inadvertent functionality. The procedure below will reset the C 446 to its
factory default settings.
For 120V version model only (AH version)
At any Source modes, press and hold front panel [3 SOURCE] button
rst and then followed by the [BACK] button. The VFD shows
For 230V version model only (C version)
At any Source modes, press and hold front panel [3 SOURCE] button
rst and then followed by the [SETUP] button. The VFD shows
IMPORTANT NOTES
• TheC446willautomaticallygotostandbymodeafterthe“reset”
display.
• RestoringtheC446toitsfactorydefaultsettingswilldeleteallAM,
FMandDABpresetsaswellasallsetupsettingsdoneviathe“Settings
Menu”.
NOTICE TO EUROPEAN CUSTOMERS
The C 446 may be operated in the following countries:
Armenia Greece Portugal
Austria Hungary Romania
Belarus Iceland Russia
Belgium Ireland Serbia & Montenegro
Bulgaria Italy Slovakia
Croatia Latvia Slovenia
Cyprus Lithuania Spain
Czech Republic Luxembourg Sweden
Denmark Macedonia Switzerland
Estonia Malta Turkey
Finland Moldova Ukraine
France The Netherlands United Kingdom
Georgia Norway
Germany Poland
EU COUNTRY RESTRICTION IN 2.4GHZ BAND
This device may be used indoors or outdoors in all countries of the
European Community using the 2.4GHz band: Channel 1-13, except where
noted below.
• In France, the output power is restricted to 10 mW EIRP when the
product is used outdoors in the band 2454 - 2483.5 MHz. There are no
restrictions when used in other parts of the 2.4 GHz band.
AH Reset...
complete.
C Reset...
complete.
5
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Other manuals for NAD C 446

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NAD C 446 and is the answer not in the manual?

NAD C 446 Specifications

General IconGeneral
BrandNAD
ModelC 446
CategoryTuner
LanguageEnglish

Related product manuals