NAD M10 V3 - Reference; Specifications; General Specifications

ENGLISH
16
GENERAL SPECIFICATIONS
Rated output power into 8 ohms 100W (ref. 20 Hz – 20 kHz at rated THD both channels driven)
Rated output power into 4 ohms 200W (ref. 20 Hz – 20 kHz at rated THD both channels driven)
THD (20 Hz -20 kHz) <0.03% (250mW to 80W 8 ohms)
<0.03% (250mW to 100W 4 ohms)
Signal-to-Noise Ratio >82 dB (A-weighted, ref.1W out 8 ohms 500 mV input)
Clipping power >123 W (ref. 1 kHz 0.1% THD 8 ohms)
>236 W (ref 1 kHz 0.1% THD 4 ohms)
IHF dynamic power 8 ohms: 160W
4 ohms: 300W
Damping factor >174 (ref. 20 Hz – 20 kHz 8 ohms)
Frequency response ±0.6 dB (20 Hz – 20 kHz)
Tone controls Treble: ±6.0 dB at 20 kHz
Bass: ±6.0 dB at 60 Hz
Channel separation >85 dB (1 kHz)
>71 dB (10 kHz)
Input sensitivity (for 100W in 8 ohms) Line In: 377 mV
Digital In: -14.8 dBFS
Network Standby mode <3.3W
Vacation mode <0.5W
PHONO IN, PRE OUT
THD (20 Hz – 20 kHz) <0.08% at 2V out
Signal-to-Noise Ratio >81 dB (A-weighted ref. 500 mV out 200 ohms source)
Input impedance (R and C) 46 kohms/100 pF
Input sensitivity 4.5 mVrms (ref. 2V 20 Hz – 20 kHz)
Frequency response ±0.3 dB (ref. 20 Hz – 20 kHz)
Maximum input signal at 1 kHz <27 mVrms (ref. 0.1% THD)
SUBWOOFER OUT
Maximum output level 5V (ref. 20 Hz 0.1%)
Signal-to-Noise Ratio >90 dB (ref. 1V A-weighted)
>96 dB (ref. 2V A-weighted)
THD+N <0.008% (ref. 2V 20 Hz)
Output impedance 600 ohms
BluOS SECTION
AUDIO
Supported Audio File Formats MP3, AAC, WMA, WMA-L, OGG, ALAC
Supported Hi-Res Audio File Formats FLAC, MQA, WAV, AIFF
Sampling Rates up to 192 kHz
Bit depths 16 – 24
CONNECTIVITY
Network connectivity Gigabit Ethernet RJ45
Wi-Fi 5
3rd Party integrations AirPlay 2
Bluetooth codec aptX HD
Bluetooth connectivity Two-Way (Receive and Headphone modes)
USB Type A (FAT32 or NTFS formatted)
USER INTERFACE
Supported operating system
Music playback from network shares on the following desktop minimum system requirement: Microsoft
Windows version 10 and macOS versions 10.15
Mobile Application
Download BluOS App for iOS and Android devices as well as Windows and macOS desktops from their
respective Application stores and BluOS downloads page - https://bluos.io/downloads
Remote control BC1 remote control
REFERENCE
SPECIFICATIONS