ENGLISH
WHAT’S IN THE BOX
Packed with your M10 V3 you will find
• Two detachable mains power cord
• BC1 remote control with 2 AAA batteries
• Mic Assembly with Ferrite Base
• USB MIC Sound Adaptor
• USB flash drive
• Cleaning cloth
• Quick Setup Guide
NOTE
Follow supplied Quick Setup Guide to help you get started with your
M10 V3.
SAVE THE PACKAGING
Please save the box and the packaging that came with the M10 V3. Should
you move or need to transport your M10 V3, this is the safest container
to use. We’ve seen too many otherwise perfect components damaged in
transit for lack of a proper shipping carton. So please, save that box!
FACTORY RESET
Factory Reset is recommended if your M10 V3 is not functioning or internet
firmware upgrade has failed. All customization including Wi-Fi network
configuration, file shares and saved playlists will be lost. They have to be
re-created once factory reset is completed.
M10 V3 can be factory reset or restored to factory default settings using any
of the following methods.
1 Via Front Panel Display
Go to Settings - Other menu option and select Factory Reset to
initiate restoring of the M10 V3 to factory default settings. Follow the
prompt commands.
2 Force Factory Reset
a Disconnect the mains power plug from the mains power outlet.
b Press and hold rear panel Standby button and while doing so
reconnect the mains power plug to the mains power outlet. Do not
release the Standby button.
c Hold down the rear panel Standby button - STATUS INDICATOR
(NAD logo) blinks Red, White and then Red. “BluOS Service Mode”
is shown the front panel display. Wait for the front panel display
to show “Factory Reset…” and then release hold of the rear panel
Standby button. Successful Factory Reset is indicated by the unit
rebooting.
- For wireless connection, M10 V3 returns to Hotspot mode and
NAD logo indicator turns into solid white.
- For wired connection, M10 V3 will simply connect as if it was a
new player and NAD logo indicator turns into solid white.
IMPORTANT
Releasing the Standby button at any time before the NAD logo indicator
begins ashing red will cancel the factory reset and leave the M10 V3 at
Upgrade Mode. Just start again the procedure for Factory Reset.
4
IMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION
WHAT’S IN THE BOX ..................................................4
FACTORY RESET ......................................................4
GETTING STARTED ...............................................5
QUICK SETUP GUIDE .................................................5
IDENTIFICATION OF CONTROLS
REAR VIEW .......................................................7
IR LEARNING .........................................................7
BluOS REMOTE CONTROL ........................................9
USING BluOS REMOTE CONTROL .....................................9
SETUP ................................................................9
PRESETS ..............................................................9
PROGRAMMING ......................................................9
CHANGING CHANNELS ...............................................9
TOP AND FRONT VIEW ..........................................10
STATUS INDICATOR NAD LOGO ................................... 10
DISPLAY TOUCH PANEL DISPLAY .................................. 10
SAMPLE DISPLAY SCREEN .......................................... 10
OPERATION
BLUETOOTH HEADPHONE/SPEAKER PAIRING ...................... 14
MASTER QUALITY AUTHENTICATED ............................... 15
DIRAC LIVE ......................................................... 15
MAKING THE MOST OF YOUR M10 V3 ............................... 15
REFERENCE
SPECIFICATIONS ................................................16
INTRODUCTION
TABLE OF CONTENTS
To Next Page
Loading...
