NAD M10 V3 - Page 6

ENGLISH
6
4 WIRELESS MANUAL SETUP
a Select your M10 V3’s unique network ID* from the Wi-Fi Setup
connection settings menu of your tablet, smart phone or computer
and connect/join.
b “…Control Panel” menu window should automatically open. If not,
open the web browser of your device and visit http://10.1.2.3.
c Select Congure WiFi from the “…Control Panel” menu.
d Select your network or applicable wireless network name (SSID)
from the Congure Wireless drop down menu.
e Enter your network’s Wireless Password (Passphrase, WEP/WAP key
as applicable) in the field Enter password or key (if protected).
f Select a Player name from the drop down list or use the on-screen
keyboard to create a customized room name in the field Custom
name.
g Select Update to save all your settings. A Congratulations…screen
prompt will appear to indicate that the setup process of your M10
V3 is completed.
h Revisit the Wi-Fi Settings on your device and ensure it has
reconnected to your network (the same network selected at Step d).
i Open desktop BluOS App. Select your M10 V3 network ID* in the
BluOS App that also shows M10 V3 NEEDS SETUP.
j Select your M10 V3 from Add Player window to proceed with the
setup.
k Input the Name you prefer to identify your M10 V3. You can either
keep the Player Name entered in Step f or rename it again. Select
Next to continue.
l Network setup process proceeds automatically. As it advances, it
will automatically enter Looking for Upgrade mode. If a firmware
upgrade is available, it will be installed automatically.
m Network setup process is completed when Setup Complete is
shown in the App. Select Finish to exit the setup process.
INTRODUCTION
GETTING STARTED