Need help?Do you have a question about the NAD T 753 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Input Impedance | 47 kOhms |
| THD | 0.05% |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| Surround System Class | Dolby Digital, DTS |
| Digital Sound Processor (DSP) | Yes |
| DSP Presets | Multiple |
| HDMI | No |
| Frequency Response | 20 Hz - 20 kHz |
| Speaker Impedance | 4 - 8 ohms |
| Signal-To-Noise Ratio | 100 dB |
Details on replacing fuses, emphasizing correct type for safety.
Procedures to ensure user safety before returning the unit.
Technical specifications for the power amplifier.
Technical specifications for Dolby Digital audio processing.
Technical specifications for Dolby Pro Logic II audio processing.
Technical specifications for DTS audio processing.
Technical specifications for the FM tuner.
Dimensions and weight of the unit.
Procedures for adjusting amplifier settings like idle current and sensitivity.
Component layout for the power supply board.
Component layout for the audio board.
Component layout for the digital board.
Component layout for the component video board.
Component layout for the DSP board.
Component layout for the front and center amplifier board.
Component layout for the surround amplifier board.
Schematic for the audio input switching circuitry.
Schematic for the component video processing circuits.
Schematic for the secondary power supply section.
Schematic for the trigger and IR control circuits.
Block diagrams for major DSP and audio processing ICs.
List of capacitor types and part numbers used in the unit.
List of transistor types and part numbers used in the unit.
To Next Page
