E20
NARCOM 4 Remote Handset
18 NARCOM 4 Remote Handset
The Narcom 4 remote handset is supplied with the Supernait 2, Nait XS 2 and Nait 5si. It
is a multi-functional remote control handset designed to be used with Naim Audio CD
players, integrated amplifiers, preamplifiers, and preset tuners.
To fit the remote handset batteries, remove the battery cover by pressing the small button
located on the rear of the handset body. Remove the cover and insert the batteries into
the body taking care with their orientation. Replace the battery cover.
System Component Keys
Numeric keys (soft)
Global Keys (CD)
Volume and mute keys
Prog Key (soft)
Global Keys (product specific)
Balance Keys
Disp Key (soft)
18.1 Using NARCOM 4
Operation of the Narcom 4 handset is based around three
types of keys: System Component Keys, Global Keys and
Soft Keys.
System Component Keys switch the operation of the Soft
Keys into modes appropriate to each system component
(CD player, preamplifier, etc.).
Global Keys operate specific component functions
regardless of the System Component Key setting and are
available at all times.
18.1.1 Integrated Amplifier Global Keys operate as
follows:
vol (5 & 6) Adjusts the volume and the volume control
position.
mute Reduces volume to zero. A second press
restores the volume.
bal (3 & 4) Adjusts the channel balance.
Note: The Nait XS 2 and Nait 5si do not incorporate any
facility for channel balance adjustment.
18.1.2 Integrated Amplifier Soft Keys operate as
described below:
Note: The handset must be in preamp mode. Press the
“pre” key.
disp Switches the front panel button indicators
off and on.
prog Press and hold to switch the preamplifier or
integrated amplifier into program mode.
numeric Enables direct selection of source inputs.
1, 2 , 3, 4, 5 and 6 correspond to the cd,
tuner, av, hdd, aux 1 and aux 2 inputs
respectively.
18.2 NARCOM 4 Keys
To Next Page
Loading...
