46
IOM
IOM
W415-2288 / 08.29.2019
6.3.4 Factory Set Motor Speeds and available CFM
P-E 2.0 ton
CFM at External Static Pressure (inches of Water Column)
Speed Tap# 0.1” 0.2” 0.3” 0.4” 0.5”
2
890 870 850 840 820
3
745 720 705 685 660
5
455 405 380 330 290
TABLE 6.
TABLE 7.
Available Motor Speed Taps
Model No.
Setting
Model No.
Setting
*IMPORTANT: Do not use common speed tap for multiple functions; Connecting (any combination of) air conditioning blower speed,
heating blower speed, and continuous fan speed to the same motor speed tap will cause the unit to malfunction.
Each of the three blower functions must be connected to separate motor speed taps.
Available Motor Speed Taps
P-E05A-A24A-A
E05A
P-E07A-A24A-A
E07A
A24A
A24A
*IMPORTANT: Do not use common speed tap for multiple functions; Connecting (any combination of) air conditioning blower speed,
heating blower speed, and continuous fan speed to the same motor speed tap will cause the unit to malfunction.
Each of the three blower functions must be connected to separate motor speed taps.
Available Motor Speed Taps
P-E10A-A24A-A
E10A
P-E15A-A24A-A
E15A
A24A
A24A
*IMPORTANT: Do not use common speed tap for multiple functions; Connecting (any combination of) air conditioning blower speed,
heating blower speed, and continuous fan speed to the same motor speed tap will cause the unit to malfunction.
Each of the three blower functions must be connected to separate motor speed taps.
To Next Page
Loading...