EasyManuals Logo

Napoleon TQ285X Instructions

Napoleon TQ285X
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
www.napoleongrills.com
13
EN
Troubleshoong
Problem Possible Causes Soluon
Low heat / Low ame
when valve turned to
high.
Blockage of gas.
Improper preheang.
Check for spider webs in the burner or orice.
Preheat grill with main burners on high for 5
to 10 minutes.
Excessive are-ups/
uneven heat.
Improper preheang.
Excessive grease and ash build up in
drip pan.
Preheat grill with both main burners on high
for 5 to 10 minutes.
Clean drip pan regularly. Do not line pan with
aluminum foil. Refer to cleaning instrucons.
Burners burn with yellow
ame, accompanied by
the smell of gas.
Possible spider web or other debris, or
improper air shuer adjustment.
Thoroughly clean burner by removing. See
general maintenance instrucons. Open air
shuer slightly according to combuson air
adjustment instrucons. (This must be done
by a qualied gas installer.)
Flames li away from
burner, accompanied
by the smell of gas, and
possibly dicules in
lighng.
Improper air shuer adjustment. Close air shuer slightly according to
combuson air adjustment instrucons. (This
must be done by a qualied gas installer.)
Burner will not light with
the igniter, but will light
with a match.
Jet-re outlet is dirty or clogged.
Clean jet-re outlet with a so bristle brush.
Humming regulator. Normal occurrence on hot days. This is not a defect. It is caused by internal
vibraons in the regulator and does not aect
the performance or safety of the gas grill.
Humming regulators will not be replaced.
“Paint” appears to be
peeling inside lid or hood.
Grease build-up on inside surfaces. This is not a defect. The peeling is caused by
hardened grease, which dries into paint-like
shards that ake o. Regular cleaning will
prevent this. See cleaning instrucons.
Burner output on “high”
seng is too low.
(Rumbling noise and
uering blue ame at
burner surface.)
Lack of gas.
Supply hose is pinched.
Dirty or clogged orice.
Spider webs or other maer in venturi
tube.
Check gas level in propane cylinder.
Reposion supply hose as necessary.
Clean burner orice.
Clean out venturi tube.

Other manuals for Napoleon TQ285X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Napoleon TQ285X and is the answer not in the manual?

Napoleon TQ285X Specifications

General IconGeneral
BrandNapoleon
ModelTQ285X
CategoryGrill
LanguageEnglish

Related product manuals