9
Lighng Instrucons
WARNING! Open lid
WARNING! Ensure all burner controls are in the o posion. Slowly turn on the cylinder gas
supply valve.
Main Burner Lighng
1. Open grill lid
2. Push and turn any main burner control knob slowly to the 'hi' posion. This acon will ignite
the selected burner.
3. If the burner does not ignite, then immediately turn the control knob back to the 'o'
posion and repeat step 2 several mes.
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'o' posion
and wait 5 minutes for any excess gas to dissipate, either repeat steps 2 and 3 or light with a
match.
5. If lighng the unit with a match, clip the match into the supplied lighng rod. Hold the lit
match down through the grill while turning the corresponding burner valve to high.
Burner Control