National Instruments cRIO-9045

What to use
• cRIO-904x
• Screwdriver, Phillips #2
• NI DIN rail mounting kit
– 4-slot models - 157254-01
• DIN rail clip
• M4 x 10 screws (x2)
– 8-slot models - 157268-01
• DIN rail clip
• M4 x 10 screws (x3)
Figure 26. Mounting the 4-slot cRIO-904x on a DIN Rail
1
2
cRIO-904x User Manual | © National Instruments | 35