Appendix E Specifications
© National Instruments Corporation E-3 FP-2000/2010/2015 User Manual
(DoC) for this product for any additional regulatory compliance information. To obtain the
DoC for this product, click Declaration of Conformity at
ni.com/hardref.nsf/
.
Cabling
Table E-1 shows the standard Ethernet cable wiring connections for both
normal and crossover cables.
The following figure shows the connector pinouts for FieldPoint Ethernet
cables.
Table E-1. Ethernet Cable Wiring Connections
Pin Connector 1
Connector 2
(Normal)
Connector 2
(Crossover)
1 white/orange white/orange white/green
2 orange orange green
3 white/green white/green white/orange
4 blue blue blue
5 white/blue white/blue white/blue
6 green green orange
7 white/brown white/brown white/brown
8 brown brown brown
Connector 1 Connector 2
pin 1
pin 1 pin 8pin 8
To Next Page
Loading...
