Maximum Component Heights
The primary side of the sbRIO-9637 is the top side of the PCB populated with the power and
Ethernet connectors. The secondary side is the bottom. The following figures show the
maximum component heights for the different regions of the primary and secondary sides.
Note In addition to the maximum component heights, you must also observe
minimum keepaway distances for adjacent PCBs and surfaces.
Figure 5. Maximum Component Height of Primary Side
31.75 mm
(1.250 in.)
96.52 mm (3.800 in.)
Max Component Height =
9.53 mm (0.375 in.)
Min Adjacent Surface Height =
9.53 mm (0.375 in.)
Min Adjacent Surface Height =
8.89 mm (0.350 in.)
Max Component Height =
7.11 mm (0.280 in.)
Max Component Height =
17.27 mm (0.680 in.)
Min Adjacent Surface Height =
19.05 mm (0.750 in.)
Figure 6. Maximum Component Height of Secondary Side
Max Component Height =
6.15 mm (0.242 in.)
Min Adjacent Surface Height =
7.62 mm (0.300 in.)
NI sbRIO-9637 User Manual | © National Instruments | 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
