Native Instruments Guitar Rig Kontrol User Manual

GUITAR RIG KONTROL Hardware Reference – 16
The RIG KONTROL is powered via USB. Operation is guaranteed only with a USB 2.0
controller as a single device or with self-powered USB 2.0 hubs. On Windows XP systems,
Service Pack 2 or higher is required for the RIG KONTROL to work – you can nd out
about your Windows version in the System Properties window.
After successfully installing the driver, the RIG KONTROL will be recognized automatically.
If not, start the software installation again as explained above.

Native Instruments Guitar Rig Kontrol Specifications

General

Brand	Native Instruments
Model	Guitar Rig Kontrol
Category	Music Pedal
Language	English