4. To reset the STEM Part volume, press and hold the Pad below the Pad of the corresponding
STEM Part + press the MOVE encoder.
The STEM Part volume is reset to full level.
Muting STEM Parts
A STEM Part can be muted immediately:
1. Press and hold the Mute button + press the Pad corresponding to the STEM Part.
The Stem Part is muted.
2. To unmute the STEM Part, repeat the aforementioned steps.
Applying Filter FX to STEM Parts
In order to apply a Filter effect to key elements of the music:
1. Press the STEMS button to access STEM Deck controls.
Tutorials
73
To Next Page
Loading...
