Using the BRM2 Brain Monitor
28 | BRM2 Brain Monitor Reference Manual
Result: The progress of the copy operation is shown by the Progress bar.
6. Touch Close to close the Patient Data File Manager screen.
Do not remove the Compact Flash card from the Monitor or disconnect the USB drive while copying is in
progress, as loss of data or damage to the card/drive may result.
To archive data files without patient identification:
1. Insert a Compact Flash card (installed in a PCMCIA adaptor) into either of the PCMCIA slots (on
the left side of the Monitor) or, connect a USB drive to either of the USB ports (at the rear of the
Monitor).
2. Wait 5 seconds, then touch Refresh to update the file lists in the Patient Data File Manager
screen.
3. Select the assessment you want to archive in the Internal Storage file list.
4. Check that there is sufficient free space on the removable media (displayed above the Removable
Media file list).
5. Touch the arrow next to the Archive button, then select Make anonymous from the pop-up
menu to display the Anonymous Archive screen.
6. In the Replace with field, enter an identifier or code word for your own reference.
7. To archive the assessment at the default level ("clinical"), touch OK. To archive the assessment at
"summary" or "raw" levels, touch Summary data or Raw data first.
Result: The progress of the copy operation is shown by the Progress bar.
8. Touch Close to close the Patient Data File Manager screen.
Do not remove the Compact Flash card from the Monitor or disconnect the USB drive while copying is in
progress, as loss of data or damage to the card/drive may result.
The patient's name and hospital ID information will both be replaced with the identifier or code word
you entered in Step 6. The same identifier will be included in the file name.
Restoring data files
To restore data files from removable media:
1. Insert a Compact Flash card containing the file to be transferred (installed in a PCMCIA adaptor)
into either of the PCMCIA slots (on the left side of the Monitor) or, connect a USB drive containing
the file to be transferred to either of the USB ports (at the rear of the Monitor).
2. Wait 5 seconds, then touch Refresh to update the file lists in the Patient Data File Manager
screen.
3. Select the file you want to restore in the Removable Media file list.
4. To copy the file to internal storage, touch Restore.
Result: The progress of the copy operation is shown by the Progress bar.
5. Touch Close to close the File Manager screen.
Do not remove the Compact Flash card from the Monitor or disconnect the USB drive while copying is in
progress, as loss of data or damage to the card/drive may result.
To cancel an archive or restore operation:
1. Touch Cancel on the Patient Data File Manager screen.
2. Touch Close to close the File Manager screen.
To Next Page
Loading...
