natus XLTEK EMU128

Xltek EMU128 Headbox User & Service Manual
15
Maintenance
To keep the EMU128 Headbox system in good working condition, follow a regular
schedule of preventive maintenance. Regular preventive maintenance does not involve
access to the interior of the EMU128 Headbox and components. For service problems
that require corrective maintenance and/or internal component service, call XLTEK’s
Service department at 1-800-387-7516, or contact your local XLTEK representative.
Periodically check cable connections and electrodes for damage and wear. Inspect
cables for bent pins. Replace frayed or worn cables. Also, regularly inspect and clean all
system components, including:
• Connectors and jack ports
• Headbox and headbox cable
• Breakout box and cable
• Electrodes and accessories
Taking basic care of the system and avoiding extreme physical abuse helps prolong the
lifespan of the headbox.
Disconnect the EMU128 Headbox and breakout box from the computer before
wiping. Disconnect all cables. Use a lint-free cloth. Do not use cleaners on any
system component.
Be careful not to allow any fluid to seep into the internal electronic components of
the headbox or breakout box.
Do NOT leave the headbox or breakout box attached to the computer when
transporting the unit.