User and Service Manual Xltek
®
EMU40EX™
9
Table 2 – EMC Standard of Compliance and Normative References
IEC 60601-1-2:2007, Edition 3.0
Medical electrical equipment – Part 1-2: General
requirements for safety – collateral standard: electromagnetic
compatibility – requirements and tests
IEC 61000-4-2:2008, ed 2.0
Electromagnetic Compatibility (EMC) Part 4-2: Testing and
Measurement Techniques - Electrostatic Discharge Immunity
Test
IEC 61000-4-3 ed 3.0 with
A1:2007+A2:2010
Electromagnetic Compatibility (EMC) Part 4-3: Testing and
Measurement Techniques - Radiated, Radio-frequency,
Electromagnetic Field Immunity Test
IEC 61000-4-4:2012, ed 3.0
Electromagnetic Compatibility (EMC) Part 4-4: Testing and
Measurement Techniques - Electrical Fast Transient/Burst
Immunity Test
IEC 61000-4-5:2014, ed 3.0
Electromagnetic Compatibility (EMC) Part 4-5: Testing and
Measurement Techniques - Surge Immunity Test
IEC 61000-4-6 ed 2.0 with A1:2004 +
A2:2006
Electromagnetic Compatibility (EMC) Part 4-6: Testing and
Measurement Techniques - Immunity to Conducted
Disturbances, Induced by Radio-frequency Fields
IEC 61000-4-8:2009, ed 2.0
Electromagnetic Compatibility (EMC) Part 4-8: Testing and
Measurement Techniques - Power Frequency Magnetic Field
Immunity Test
IEC 61000-4-11:2004, ed 2.0
Electromagnetic Compatibility (EMC) Part 4-11: Testing and
Measurement Techniques - Voltage Dips, Short Interruptions
and Voltage Variations Immunity Tests
IEC 61000-3-2:2014, ed 4.0
Electromagnetic Compatibility (EMC) Part 3-2: Limits - Limits
for Harmonic Current Emissions
IEC 61000-3-3:2013, ed 3.0
Electromagnetic Compatibility (EMC) Part 3-3: Limits -
Limitation of Voltage Changes, Voltage Fluctuations and
Flicker in Public Low-voltage Supply Systems
CISPR 11 ed 5.0 with A1:2010
Industrial, Scientific and Medical (ISM) Radio-Frequency
Equipment - Electromagnetic Disturbance Characteristics -
Limits and Methods of Measurement
To Next Page
Loading...
Need help?
General
