User and Service Manual Xltek
®
EMU40EX™
61
Maintenance, Cleaning, & Disposal
To keep the EMU40EX amplifier in good working condition, follow a regular schedule of preventive
maintenance. Regular preventive maintenance does not involve access to the interior of the EMU40EX
amplifier and components. For servicing problems that require corrective maintenance and/or internal
component service, call Natus Technical Support at 1-800-303-0306, or contact your local XLTEK
representative.
Periodically check cable connections and electrodes for damage and wear. Inspect cables for bent pins.
Replace frayed or worn cables. Also, regularly inspect and clean all system components, including:
Connectors and jack ports
Base Unit, Breakout Box and USB 2.0 cable
Electrodes and accessories
Like any piece of equipment, the EMU40EX is subject to increased daily wear and tear. Taking basic care
of the system, and avoiding extreme physical abuse, helps prolong the lifespan of the EMU40EX.
Recommendations
Disconnect all cables from the EMU40EX before wiping. Use a lint-free cloth. Do not use
cleaners on any system component.
Be careful not to allow any fluid to seep into the internal electronic components of the system.
Do NOT leave the amplifier attached to the computer when transporting the unit.
Do NOT autoclave, pressure sterilize or gas sterilize this amplifier. It is not possible to clean
bio-contaminate from the amplifier.
Do NOT soak or immerse the amplifier in any liquid.
A cleaning solution of 70% isopropyl alcohol is recommended.
Use cleaning solution sparingly. Excessive solution can flow into the amplifier and cause
damage to internal components.
Do NOT touch, press or rub the LCD with abrasive cleaning compounds, instruments,
brushes, rough-surface materials, or bring them into contact with anything that could scratch
the panel.
Do NOT use petroleum-based or acetone solutions, or other harsh solvents, to clean the
amplifier. These substances attack the device’s materials and device failure can result.