To Next PageTo Next Page
Need help?Do you have a question about the natus Nicolet EEGwireless32 and is the answer not in the manual?
General| Channels | 32 |
|---|---|
| Wireless | Yes |
| Input Impedance | > 100 MΩ |
| Resolution | 24-bit |
| Wireless Range | Up to 10 meters |
| Battery Life | Up to 8 hours |
Describes the purpose and intended use of the Nicolet EEGwireless32/64 amplifier.
Contains copyright and usage restrictions, plus information about the Nicolet brand.
Details Declaration of Conformity and R & TTE Directive compliance.
Details FCC compliance requirements and transmission power levels for the amplifier.
Explains safety labels, provides guidelines, and lists precautions for the amplifier.
Discusses using the amplifier with other equipment and associated safety considerations.
Directs users to additional guides and IT requirements for safety and setup.
Refers to specification sheets and provides instructions for inspecting the amplifier.
Covers recycling, disposal, CE mark, and technical support contacts.
Explains the meaning of various symbols and labels used on the amplifier.
Details the amplifier unit, its components, operating system, and power source.
Covers activating batteries, removing covers, headbox handling, and labels.
Provides instructions for inspecting, cleaning, and performing preventive maintenance.
Describes how to use and attach the amplifier to the garment for patient wear.
Introduces cabling diagrams and details power cable specifications and connector orientation.
Illustrates wireless connection setups using mains power, battery power, and access points.
Details wired network connections for cart-based, PanelPC, and laptop systems.
Explains computer connections for video options and amplifier configuration via USB.
Provides general operating guidelines, safety checks, and power-on procedures.
Covers performing impedance tests, understanding indications, and using standalone recording mode.
Discusses memory capacity, clearing onboard memory, and downloading data to the PC.
Explains how to acquire SpO2 data using the amplifier's built-in sensor support.
Details the wireless panel, its indicators, and initial system setup steps.
Covers selecting amplifiers, protocols, checking impedance, and starting recordings.
Explains optional steps like automatic impedance testing, editing parameters, filters, and splitting recordings.
Describes data catch-up procedures for disconnections and how to change sampling rates.
Addresses wireless sampling rate limits, handling disconnections, and restarting acquisition.
Explains internal and external battery indicators, charging methods, and battery life.
Provides battery pack capacity data and instructions for replacing batteries.
Details onboard memory capacity, storage estimates, and download rates.
Illustrates different operational modes based on battery and network configurations.
Guides on setting up the utility, understanding the dialog, and configuring IP/MAC addresses.
Explains status displays, access points, and DHCP/Static IP configuration within the utility.
Provides general EMC information, emissions, immunity guidance, and precautions.
Details recommended separation distances and manufacturer declarations for emissions.
Explains how to interpret error codes displayed via amplifier LEDs and power LED color codes.
Lists specific error numbers, LED patterns, and descriptions for troubleshooting amplifier issues.
Addresses problems with selecting amplifiers, headboxes, and protocol mismatches.
Covers reviewing incomplete exams, file status, overflow errors, and memory card issues.
