April 27, 2015 3-3
EEGwireless32/64 Connections
Power cable lengths
The battery cable lengths are 11 inches, 30 inches and 15 feet.
Power connector orientation
The power connection for this amplifier is a keyed push-in connector. The connector
has 2 built in keying notches, which are delineated by two arrows indicating the top of
the connector plug. This design is intended to guard against the power connector
being inserted in the wrong orientation, which can result in damage to the amplifier
and/or power connector. Refer to the figure below, which shows the proper
orientation of the power connector with the two arrows facing upwards before
plugging the connector into the battery, amplifier or wallplate.
1 wEEG wallplate
2 Battery/Charger
3 Nicolet EEGwireless amplifier
4 Align the two notches with the two connector grooves on the wEEG wallplate,
Battery/Charger and Nicolet EEGwireless amplifier before plugging in the connector.
To Next Page
Loading...
Need help?
General
