April 27, 2015 1-3
Introduction
About the Nicolet EEGwireless32/64 amplifier unit
The Nicolet EEGwireless32 and Nicolet EEGwireless64 amplifiers are unique
amplifiers and are referred to as Nicolet EEGwireless32/64 amplifier in this manual.
The Nicolet EEGwireless32/64 amplifier is a 32/64 channel EEG amplifier that
connects to a Nicolet Brand system via wireless transmission or a standard network
port. The Nicolet EEGwireless32/64 amplifier can be used in a hospital setting
without the addition of custom network infrastructure.
The Nicolet
EEGwireless32/64
amplifier
• captures all signals needed to perform LTM monitoring, EEG, Sleep studies,
research, Ambulatory and ICU monitoring.
• provides low signal amplification (alternating current ‘AC’ recording) of
physiological signals, and is designed specifically to amplify EEG and intracranial
EEG signals.
• provides wired Ethernet or wireless Ethernet transmission of digitized signals,
which interfaces to a Nicolet Acquisition system.
• provides a Stand Alone Mode feature for urgent recording situations.
• provides user selectable parameters including sampling rates and filters.
• includes built in SpO2, patient event button, and provides referential, bipolar
recording.
• the amplifier is compact and lightweight with a custom garment wearable by the
patient.
Operating system The Nicolet EEGwireless32/64 amplifier uses FreeRTOS™ as its operating system.
For FreeRTOS™ licensing details, please visit www.freertos.org/a00114.html.
FreeRTOS™ is a trademark of Real Time Engineers Ltd.
To Next Page
Loading...
Need help?
General
