Nautel NV10LT - Module Exchange Program; Tools for Installation

NV10LT/NV7.5LT INSTALLATION MANUAL PARTS AND TOOLS
VERSION 5.0 2021-03-01 PAGE 2.10.3
Module Exchange Program
Nautel offers a module exchange program for customers who require expedited servicing and
replacement of faulty modules. The module exchange program provides immediate replacement of
failed modules with refurbished modules.
 The replacement module is shipped to the customer as soon as the customer reports the
failure. The customer then returns the failed module to Nautel using the same shipping
package.
Tools for Installation
The tools you need during transmitter installation include the following:
 Digital voltmeter (recommend 1000 V, CAT-III rating)
 Phillips screwdrivers, sizes #1 and #2
 Pliers
 Wire cutters
 Panel punch (Greenlee, etc.) for suitable size cable entry hole, as desired
 Hex wrenches (Allen keys)
 Torque wrench with hex adapter, capable of 120 in-lbs (13.6 N-m) (for ac input terminal block)
 Metric and Imperial socket set up to 24 mm (15/16 inch)
 Metric and Imperial wrench set up to 25 mm (1 inch)
 Electrician’s knife