VX150 TO VX2 INSTALLATION MANUAL PHYSICAL REQUIREMENTS
PAGE 1.3.2 VERSION 0.3 2021-01-14
Clearances
Provide a minimum clearance of 61 cm (2 ft.) at the front, back and right-hand side of the VX150 to
VX2 transmitter to allow for air flow (intake in the front, exhaust in the rear) and for physical access to
the front and rear panels for installation and maintenance.
Check the clearance around the host cabinet to ensure that you will be able to open all doors and
access panels. Ensure adequate space is available at the front of the cabinet to allow pulling out the
transmitter for servicing fan filters and internal parts/assemblies. Also consider access to the rear of the
cabinet for making connections to the transmitter.
Internal fans pull cooling air through air filters in the front of the transmitter. The cooling air exhausts
through grills at the rear and at the right-hand side of the transmitter.
Weight
The unpacked weight of the VX150 to VX2 transmitter is less than 30 lbs (22.7 kg), making it safe for
one person to lift the transmitter for installation and maintenance.
The packed (boxed) weight of the VX150 to VX2 transmitter is less than 70 lbs (31.8 kg).
To Next Page
