VX150 TO VX2 INSTALLATION MANUAL UNBOXING AND INSTALLING THE TRANSMITTER
PAGE 1.9.2 VERSION 0.3 2021-01-14
Mounting the Transmitter
To mount the VX150 to VX2 transmitter in a cabinet, refer to the following installation aids provided
with the VX transmitter:
• Unpacking/Installation Video (located on the USB device that also contains the technical docu-
mentation suite): step-by-step video that shows how to unpack your VX transmitter and prop-
erly mount it in a cabinet.
• VX150 to VX2 Quick Start Guide: full-colour foldout guide that provides instructions to install
the VX transmitter in a cabinet and achieve on-air operation.
NOTE:
Unless otherwise specified, all hardware referenced in the Unpacking/Installation video or the
VX150 to VX2 Quick Start Guide is included in the VX150 to VX2’s Ancillary kit (Nautel Part #
235-8010).
To Next Page
Loading...
