VX150 TO VX2 INSTALLATION MANUAL PROGRAM INPUTS
VERSION 0.3 2021-01-14 PAGE 1.7.3
Pilot/MPX Sample
Each VX series transmitter exciter provides either a 19 kHz pilot sample (500 mV pk-pk) on the 19 kHz
OUT female BNC connector. The output is selectable through the local (or remote) AUI or the controller
UI.
External Audio Playlist via USB
IMPORTANT! The transmitter’s USB ports are not designed to act as charging ports.
The transmitter can be configured to accept an external audio playlist on a USB drive that is connected
to either of the two USB connectors on the rear panel of the transmitter or the single USB connector on
the front panel. When properly configured using the AUI’s
Presets menu (see below for details).
For preset setting requirements, see the
VX Operations and Maintenance Manual
.
To Next Page
Loading...
