EasyManua.ls Logo

Nautel VX150 - Page 70

Nautel VX150
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VX150 TO VX2 INSTALLATION MANUAL COMMISSIONING
PAGE 1.11.6 VERSION 0.3 2021-01-14
Figure 1.11.1: Network Settings screen
MAC Address: Set during factory testing; cannot be modified
DHCP or Static IP: Set to DHCP if your network has a DHCP server. Automatically assigns IP, netmask, gateway
and nameservers. Set to Static IP if you do not have a DHCP server or if you wish to assign static addresses.
IP Address: Specify the IP address. Consult with your network administrator.
Subnet Mask: Typical netmask address shown. Consult with your network administrator.
Default Gateway: Specify the gateway address. Consult with your network administrator.
Default Nameserver: Specify a nameserver (or DNS) to enable the use of host names. If no nameserver is entered,
only direct IP addresses can be used to configure the email server and any live streams such as Shoutcast.
Port Number: Specify the AUI port # for port forwarding. 3501 is the default port number.
All IP addresses shown are for reference purposes only

Table of Contents