Nautilus T514 - Maintenance; Walking Belt and Deck Lubrication

56
Nautilus® Sport Series Treadmill Owner’s Manual
Visually inspect and clean the treadmill regularly. Daily
visual inspection should include:
• Inspect the power cord and walking belt for wear.
• Check the position of the walking belt; be sure it is
not rubbing against the frame. The belt should be
evenly spaced on the deck within 0.25 inch; adjust if
necessary.
• Remove potential hazards from the treadmill area.
CLEANING
• Daily: Keep the treadmill and display free of dust and
debris. Use a damp sponge to wipe the exteriors and
walking belt; do not soak surfaces. Dry all surfaces
thoroughly. Use a mild glass cleaner to clean display
and keypad areas. Do not spray cleaner directly onto
the treadmill. Instead spray cleaner onto a clean
cloth.
• Weekly: Elevate the treadmill to maximum incline
and vacuum the floor under it to prevent excess dust
and dirt from interfering with operation.
For best performance, we recommend your treadmill be
placed on a treadmill mat. Along with reducing noise, a
treadmill mat will help to keep dust and debris away from
your treadmill’s critical components.
TREADMILL INTERIOR
Depending upon the treadmill environment, dust and/or lint
can accumulate under the hood. Periodic internal cleaning/
vacuuming should be done by qualified service personnel.
WALKING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated deck and
belt system. We recommend periodic lubrication.
Use the following timetable as a guide to lubricate the
deck:
• Light user (less than 3 hours of use per week)- Lubricate
annually
• Medium user (3-5 hours of use per week)- Lubricate
every six months
• Heavy user (more than 5 hours of use per week)-
Lubricate every three months
We recommend that you use the following:
• Lube-N-Walk™ Treadmill Lubrication Kit, available from
JAD Fitness, Inc. Purchase this kit from JAD Fitness by
calling 800-877-3486 or by visiting www.jadfitness.com.
You may also be able to purchase this from a specialty
fitness dealer.
• NAPA® 8300 Silicone Spray, available at most NAPA®
Auto Parts stores.
NOTE: Do not use lubricants with silicone distillates.
MAINTENANCE
ALWAYS UNPLUG THE TREADMILL FROM
THE ELECTRICAL OUTLET BEFORE CLEANING,
LUBRICATING, OR SERVICING THE UNIT.
7 ! 2 . ) . '
! 4 4 % . 4 ) / .
$ ! . ' % 2
)--%$)!4%!#4)/.2%15)2%$
# ! 5 4 ) / .
DO NOT REMOVE THE TREADMILL MOTOR
COVERS: DANGEROUS VOLTAGES ARE
PRESENT. COMPONENTS ARE SERVICEABLE
ONLY BY QUALIFIED SERVICE PERSONNEL.
7 ! 2 . ) . '
! 4 4 % . 4 ) / .
$ ! . ' % 2
)--%$)!4%!#4)/.2%15)2%$
# ! 5 4 ) / .