8
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum2.2mx4m(86”x157”).Besurethattheworkoutspaceyouare
utilizinghasadequateheightclearance,takingintoconsiderationtheheightoftheuserandthemaximuminclineofthe
machine.
Basic Assembly Tips
Follow these basic points when you as-
semble your machine:
• Read and understand the “Important
Safety Instructions” before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift
and look through the bolt holes to help
insert the bolt through the holes.
• The assembly can require 2 people.
SPECIFICATIONS
159.5 cm
(62.8”)
95.5 cm
(37.6”)
198.1 cm
(78”)
169 cm
(66.6”)
139.3 cm
(54.9”)
Maximum User Weight: 136 kg. (300 lbs)
Total Surface Area (footprint) of equipment: 16,468cm
2
Maximum Inclined Deck Height: 43.7 cm (17.2 inches)
Assembled Weight: approx.115kg(253.5lbs)
Power Requirements:
Operational Voltage: 220V - 240V AC, 50/60Hz
OperatingCurrent: 8A
Heart Rate Chest Strap: 1 CR2032 battery
Sound Emission: Less than 70 db average without
load. Noise emission under load is higher than without load.
DO NOT dispose of this product as refuse. This product is
to be recycled. For proper disposal of this product, please
follow the prescribed methods at an approved waste
center.
4m ( 157” )
2.2m
( 86” )
2m
( 79” )
0.6m
( 24” )
0.6m
( 24” )