Nautilus U618 - Page 11

11
g. RUN LED TEST – Drives LEDs to the following states:
  1. AllLEDsOn1second
  2. AllLEDsOff1second
3. Sequence Segments 1 at a time – on 1 second, off 1 second
  Pressanykeytoexittest
 h. RUNLCDTEST–Drives3x5and1x5LCDdisplayswiththefollowingpatterns:
  1. Allsegmentson
  2. Allsegmentsoff
3. Set individual segments one at a time until all segments are illuminated.
  Pressanykeytoexit.
i. RESET CONSOLE – Resets the data from user inputs. The Console setup, user records and workout records will
beresettodefaults.ThisoptiondoesnotresetMFGNVM(nonvolatilememory).
11. TheConsoledisplayshowstheSoftwareVersionprompt.
12. Forthenextprompt,pushtheOKbutton.
13.TheConsolewilldisplaythePower-UpModescreen.