Nautilus U618 User Manual

50
13. Reinstall the Mast, Console, Mast Gasket and Top
Shroud. (Refer to the “Replace the Shrouds” procedure.)
Turn the power on.
Machine is on. Current is active. There is risk of
electrical shock.
14. Use the console to set the resistance to the highest
level. Unplug the machine.
Disconnect all power and allow to sit for 5
minutes.
15. PuttheBrakeArm(K)backinpositionandconnectthe
Tension Spring (J) using the needlenose pliers.
Note: Before fully attaching the Shrouds, remove the
cardboardfrombetweentheBrakeMagnet(A)
and the Flywheel (B). Power up the machine to
verifythattheMagnetArmcanmovefreely,and
that the Brake Magnet and Flywheel do not touch
atthemaximumresistancelevel.Ifnecessary,
refer to the “Set the Brake Tension” procedure.
16. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
!
Do not use until the machine has been fully
assembled and inspected for correct performance
in accordance with the Owner’s Manual.

Nautilus U618 Specifications

General

Bluetooth Connectivity	Yes
User Profiles	4
Resistance Type	Magnetic
Transport Wheels	Yes
Display	LCD
Heart Rate Monitoring	Contact
Seat	Adjustable
Flywheel Weight	18 lbs
Maximum User Weight	150 kg