NCR 6932-2202-9090 - Downloading the Utility Applications

Configuration 3-19
Operating
System
Utility Application Description
Linux
Linux Command Line Flash
and Configuration Utility
Note: There are two
versions of this utility, one
each for a 32-bit system
and a 64-bit system. Make
sure to download the
correct version for your
system.
A command line tool that updates
the firmware and keymap of the
keyboard using a command prompt.
Downloading the Utility Applications
To install the NCR Matrix Maker utility, perform these steps:
1. Go the NCR website: http://www5.ncr.com/support/support_drivers_patches.asp.
2.
Select Retail Support Files (Drivers, Firmware, Operating Systems, Platform
Software (OPS/JavaPOS), BIOS, etc.).
3.
Select NCR RealPOS and SelfServ Peripherals (Firmware, Drivers, Utilities).
4.
Select Keyboards.
5.
Select 6932-2xxx (USB 64-Key, PS/2 64-Key).
6.
As appropriate for the Operating System, select the Utility file to download.
7. Follow the on–screen instructions to download the utility application.
Note: For concerns regarding the configuration software installation, please contact the
local NCR 6932–2xxx Keyboard supplier.