3-20 Configuration
NCR Matrix Maker Utility
Installing the NCR Matrix Maker Utility
1. Run the NCR Matrix Maker installer. The NCR Matrix Maker setup is displayed.
2.
At the welcome screen, select Next. The following window is displayed.
3. Select Browse to specify the destination directory of the software to be installed, and
then select Next to continue.
Note: The default installation location of NcrMatrixMaker.exe is the following:
• For 32-bit operating systems, C:\Program Files\NCR Matrix
Maker\Programmable Keyboard
• For 64-bit operating systems, C:\Program Files (x86)\NCR Matrix
Maker\Programmable Keyboard
4. Select Next.
To Next Page
Loading...